Software Downloads

Qstart™ XML is a simple, user-friendly software program that allows field crews to quickly set up and activate ADS ECHO™, RainAlert® III™, and TRTION+® monitors as well as collect and review data from these monitors. Qstart^XML was developed to support the new ADS TRITON+ firmware (version 6.40) as well as better support ADS’ new web-based software, PRISM™. When monitors are activated using Qstart^XML XML configuration files are created rather than Location Information Files (LIFs) for easy import into PRISM. In addition, Qstart^XML supports several new ADS TRITON+ features: a Time Zone device, an ability to deliver data at a faster interval during alarm conditions, an ability to deliver data to both PRISM/FlowView™ and up to two FTP servers, and an ability to configure Flow Loss alarms.

Download Qstart^XML (version 1.1.0.34) (If the download takes too long to start, right-click the link and select “Save Link As” and then “Save” the zip file to your computer). If upgrading to a newer version of Qstart^XML, uninstall the older version before installing the new one.

For step-by-step instructions to install Qstart^XML, download the Qstart^XML Installation Guide.

For step-by-step instructions on how to use Qstart^XML, download the Qstart^XML Quick Reference Guide.

For step-by-step instructions on how to configure and activate the ADS ECHO using Qstart^XML, download the ECHO – Qstart^XML Quick Reference Guide.

For step-by-step instructions on how to configure and activate the ADS RainAlert III using Qstart^XML, download the RainAlert III– Qstart^XML Quick Reference Guide.

Qstart is a simple, user-friendly software program that allows field crews to quickly set up and activate ADS flow monitors as well as collect and review data from these monitors.

Click the following link to download: Qstart (version 1.9) (If the download takes too long to start, right-click the link and select “Save Link As” and then “Save” the zip file to your computer).

For step-by-step instructions to install Qstart, download the Qstart Installation Guide.

For step-by-step instructions on how to use Qstart, download the Qstart Quick Reference Guide. If upgrading to a newer version of Qstart, please uninstall the older version before installing the new.

For step-by-step instructions on how to configure and activate the ADS ECHO using Qstart, please download the ECHO-Qstart Quick Reference Guide.

ADS Firmware

Current versions of the firmware for ADS products are listed below. Right-click on the link next to your ADS product(s) and select “Save Link As…” to download the corresponding firmware.

– ADS ECHO Level Monitor and RainAlert III Rainfall Monitor Firmware – Download Firmware (Version 8.12r001)

– ADS TRITON+ (for use with Qstart^XML) – Download Firmware (Version TritonPlusXML 6.44r003) – ADS TRITON+ monitors must be upgraded to this version before being activated with Qstart^XML or PRISM. This firmware version supports many new features as highlighted above in the Qstart^XML downloads section.

TRITON+ (Model 8000) – Download Firmware (Version TritonPlus_v619r001)

Legacy Firmware

– FlowShark Triton (Model 8000) and IETG FlowHawk Monitors Using the 3G External Modem – Download Firmware (Version 4.81r001)

– FlowShark Triton (Model 8000) and IETG FlowHawk Monitors Using the 2G External Modem – Download Firmware (version 4.74r14)

– EMUX for FlowShark Triton (Model 8000) – Download Firmware (Version 901r8)

– FlowAlert and RainAlert II – Download Firmware (Version DSP610r6)

– FlowShark (Model 5000)
          FlowShark AG, BG, CG – Download Firmware (Version DSP203r23; COMM 160r30)
          FlowShark IS – Download Firmware (Version DSP 203r23)
          FlowShark AL – Download Firmware (Version DSP 203r19)

Pressure Coefficients are factory calibration values associated with each ADS pressure sensor. Right-click the links below to download pressure coefficients:

2011 2012 2013 2014 2015

Current versions of the firmware for ADS products are listed below. Right-click on the link next to your ADS product(s) and select “Save Link As…” to download the corresponding firmware.

– ADS ECHO Level Monitor and RainAlert III Rainfall Monitor Firmware – Download Firmware (Version v811r008)

– ADS TRITON+ (for use with Qstart^XML) – Download Firmware (Version TritonPlusXML 6.43r035) – ADS TRITON+ monitors must be upgraded to this version before being activated with Qstart^XML or PRISM. This firmware version supports many new features as highlighted above in the Qstart^XML downloads section.

TRITON+ (Model 8000) – Download Firmware (Version TritonPlus_v619r001)

– FlowShark Triton (Model 8000) and IETG FlowHawk Monitors Using the 3G External Modem – Download Firmware (Version 4.81r001)

– FlowShark Triton (Model 8000) and IETG FlowHawk Monitors Using the 2G External Modem – Download Firmware (version 4.74r14)

– EMUX for FlowShark Triton (Model 8000) – Download Firmware (Version 901r8)

– FlowAlert and RainAlert II – Download Firmware (Version DSP610r6)

Pressure Coefficients are factory calibration values associated with each ADS pressure sensor. Right-click the links below to download pressure coefficients:
2011 2012 2013 2014 2015

Bluetooth & USB Drivers

USB Driver (setup executable file) – Required for ADS USB Communication Cables P/N 8000-0337 (ADS TRITON+) and P/N 9000-0028 (ADS ECHO and RainAlert III).

Download USB Driver (For step-by-step instructions to install the driver, download the Driver Installation Guide) (Right-click and select “Save Link As…”).

Bluetooth Driver – Supports on-site direct wireless communications with the ADS ECHO. The download file is a zipped/compressed file named CP210x_Windows_Drivers.zip. All files within the .zip folder must be extracted and saved on your computer to run the application. Once the files are extracted, run the CP210xVCPInstaller_x64.exe file for 64-bit systems and CP210xVCPInstaller_x86.exe file for 32-bit systems.

Download Bluetooth Driver (Right-click and select “Save Link As…”).

ACCUSONIC AccuFlow Software

ACCUSONIC offers a software product for use with our multi-path transit-time flowmeter systems.

AccuFlow™ is a Windows-based software utility that communicates with the ACCUSONIC 7510, 8510, and 8510+ Series Flowmeters. The software allows an operator to configure the flowmeter for specific operational conditions and provides the capability to display, archive and retrieve flow and diagnostic data.

Download AccuFlow Software (.zip file) to your computer. (Right-click and select “Save Link As…”.)